H&T Intelligent Control International Co., Ltd.

The HET-CC2530-B1 Zigbee Module is a low cost, low power, highly integrated 2.4-GHz transceiver that suitable for systems with targeting compliance with worldwide radio-frequency regulations.
It’s a true system-on-chip solution for 2.4-GHz IEEE802.15.4, ZigBee and RF4CE applications.

Applications

2.4-GHz IEEE 802.15.4 systems
RF4CE remote control systems (64-KB flash and higher)
ZigBee systems (256-KB flash)
Home/Building automation
Lighting systems
Industrial control and monitoring
Low-Power wireless sensor networks
Consumer electronics
Health care

Key Feature

2.4-GHz IEEE802.15.4 compliant RF transceiver
Excellent receiver sensitivity and robustness to Interference. Typical receiver sensitivity: -97dBm
Programmable output power up to 4.5dBm
Suitable for systems targeting compliance with worldwide radio-frequency regulations
Accurate digital RSSI / LQI support
Data rate: 250kBank
Modulation: O-QPSK

Microcontroller

High-Performance and Low-Power 8051 Microcontroller
Hardware debug support
Powerful five-channel DMA
128KB in-system programmable flash, customization 32-, 64-, 256KB
8KB RAM with retention in all power modes
CSMA/CA hardware support
AES security coprocessor
Battery monitor and temperature sensor
12-Bit ADC with eight channels and configurable resolution
Two powerful USARTs with support for several serial protocols
IEEE 802.15.4 MAC timer, general-purpose timers (One 16-Bit, Two 8-Bit)
32-kHz sleep timer with capture
Watchdog timer
21 general-purpose I/O pins

Low Power

Active Mode RX (CPU Idle): 24 mA
Active Mode TX at 1 dBm (CPU Idle): 29 mA
Power Mode 1 (4 ms Wake-Up): 0.2 mA
Power Mode 2 (Sleep Timer Running): 1 mA
Power Mode 3 (External Interrupts): 0.4 mA
Wide Supply-Voltage Range (2V - 3.6V)

Please contact us for more detail information.